sales@powertoolsa.co.za R70 delivery Via The Currier Guy – Pudo locker to locker Delivery 1-3 days dependent on area
STOP START SWITCH WITH NO-VOLT COIL 220V – 5 PIN
STOP START SWITCH WITH NO-VOLT COIL 220V – 5 pin
DOUBLE POLE SWITCH = 2 IN 2 OUT (LIVE + NEUTRAL)
COIL VOLTAGE = 220V
RATED AMPRAGE = 10AMPS
GREEN BUTTON = START
RED BUTTON= STOP
R395.00
In stock
STOP START SWITCH WITH NO-VOLT COIL 220V – 5 pin
The switch is the perfect switch to use on magnetic base drills / drill press / table saws / bench grinders and many other tools as the no-volt coil protects the operator from leaving the switch in the on position during the event of power loss or in some cases an overload protector reset.
The switch has 2 wires in and 2 wires out and in some cases a 5 wire to secure the voltage to the coil if an read switch or overload switch is connected in the circuit.
Specifications
- Brand Name: DKLD – ADMM
- Model Number : DKLD_DZ-6 – 5PIN
- Switch Type: Push Button Switch
- Operation mode: ON-OFF
- Contact type Normally Open
- Rated Voltage: 250V AC
- Rated Current: 15A (AC-2)
- Coil Voltage: 220-240V
- Rated Frequency: 50/60Hz
- Pin Number: 5Pin
- Degree Protection: IP55
Technical Data
- Hidden body size 22*46 mm
- Magnetic coil fixation
- Base width: 22 mm.
- Base length: 46 mm.
- Base height: 42 mm.
- Package length (cm) 5.9
- Package width (cm) 2.8
- Package height (cm) 2.8
- Gross weight (kg) 0.085000
- EAN 4014915097747 / 6889100148638
The DKLD_DZ6 switch has very similar looks and functionality as the following switch brands and part numbers below.
YH02-A / AWV250 / SCY-35HD / KJD20-2
METABO = METABO DH330
MAC-AFRICA = ZWSAWRA001022
